Battery Charger: BC-12-2A-SMPS

BC-12-2A-SMPS
Model BC-12-2A-SMPS
INPUT
AC INPUT VOLTAGE 220VAC, 1¯
AC INPUT WORKING RANGE 90VAC TO 265VAC
FREQUENCY 50Hz ± 6%
INRUSH CURRENT LIMITED BY NTC THERMISTER
SURGE VOLTAGE PROTECTION MOV
EMI/EMC EMI-RFI FILTER AT INPUT
OUTPUT :
VOLTAGE & CURRENT 20.0V / 0.2A
14.5V / 2.0A
13.3V / 1.0A
RMS CURRENT RIPPLE ² 5%
CHARGING PROFILE MULTI STEPS CHARGING (PLEASE SEE TABLE-1)
INDICATION & ALARM :
LCD DISPLAY PARAMETERS OUTPUT VOLTAGE.
OUTPUT CURRENT.
CHARGING TIME.
STEP NUMBER.
CHARGER STATUS.
BUZZER CHARGE FINISH.
PROTECTIONS : BATTERY REVERSE PROTECTION.
SHORT CIRCUIT PROTECTION.
SPARK PREVENTION WHILE CONNECTING BATTERY CLIPS
AUTOMATIC SHUT OFF WHEN BATTERY DISCONNECTED.
AC INPUT FUSE.
GENERAL
NUMBER OF BATTERY 1 NO / 12V
CONTROL HIGH FREQUENCY PWM
COOLING SYSTEM NATUARAL AIR COOL
OPERATING TEMPERATURE 0¡C TO 50¡C
RELATIVE HUMIDITY 95% MAXIMUM,NON CONDENSING
ALTITUDE 1500MTR AMSL
ENCLOSURE IP20
WEIGHT 1.2KG
DIMENSIONS( H x W x D ) 110mm X 115mm X 210mm
Since we are committed to continuous development of our products, the specification are subject to change without notice.

TABLE-1
FOR 12V SYSTEM
,1st STEP (BOOST/CHARGE)
CHARGING VOLTAGE,MAX. 15V
CHARGING CURRENT,2A/4A/6A/8A
TRANSITION CONDITION,VBATT = 15.0V

FOR 24V SYSTEM
,1st STEP (BOOST/CHARGE)
CHARGING VOLTAGE,MAX. 30.0V
CHARGING CURRENT,2A/4A/6A/8A
TRANSITION CONDITION,VBATT = 30.0V

“IN FLOAT MODE, IF VBATT < 12.8V / 25.6V, CHARGING PROCESS WILL START AGAIN." [/table]

Bookmark the permalink.